Restriction According To Mounting Directions; Installation Space - Panasonic GT32-R User Manual

3.1.2 Restriction According to Mounting Directions

If the unit is being installed in a horizontal orientation, or our Programmer II and C-NET adaptor are
being connected to the TOOL port, note that the ambient usage temperature should be as below.
Model
Condition
name
Vertically installed
GT11 Programmer II
C-NET adapter
Horizontally installed
GT21 Programmer II
C-NET adapter
GT32 Horizontally installed
Horizontally installed
GT03-E
GT32-E
Vertically installed
Note) When installing the unit aslant, the restriction is the same as the one when installing horizontally.

3.1.3 Installation Space

Applicable panel thickness
A panel with a thickness of 1.0 to 5.0 mm should be used.
Use a panel that is strong enough not to be warped.
Clearance when the GT is installed
When installing other parts to the panel or wiring cables to it, provide a clearance around the panel to
prevent cables from being damaged and to facilitate the installation work.
When performing installation work, make sure to observe the following.
 Never obstruct the slits of the GT unit.
 Make sure that no foreign matter enters inside through the slits. If conductive foreign matter enters
inside, it may malfunction or product failure.
Model name
GT01
GT11
GT21
GT02L
GT03M-E
GT02
GT05
GT03T-E
GT12
GT32
GT32-R
GT32-E
* It should be 40 mm or more when using a SD memory card.
3-4
Ambient
temperature
0 to 45 C
0 to 40 C
-20 to 55 C
Clearance on the surface
Clearance
30 mm or more
(50 mm or more
recommended)
to connect the screen
transfer cable
20 mm
60 mm
60 mm
Clearance on the
mounting surface when
using a SD memory card
-
-
40 mm or more