Gt12; General Specifications (Gt12) - Panasonic GT32-R User Manual

6.7 GT12

6.7.1 General Specifications (GT12)

Item
Rated voltage
Operating voltage range
Power consumption
Insulation method of
power supply part
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Note1)
Breakdown voltage
Insulation resistance
Vibration resistance
Shock resistance
EC Directive applicable
Noise immunity
Protective construction
Weight
Note1) Not isolated between the USB port, COM. port and the internal digital circuit.
Note2) When using our exclusive cable.
Note3) When installing the unit again, replace the water-proof packing.
6-26
24 V DC
21.6 to 26.4 V DC
1.7 W or less (70 mA or less)
Transformer insulation
0 to +50 C
20 to 85% RH (at 25 C), non-condensing
-20 to +60 C
10 to 85% RH (at 25 C), non-condensing
Between [power supply terminals (+ and – terminals)] and [function earth
terminal]
500 V AC for 1 minute, Cutoff current 10mA (in initial status)
Between [power supply terminals (+ and – terminals)] and [function earth
terminal]
Note1)
100 M or more, 500 V DC, measured with megohmmeter (in initial
status)
5 to 9 Hz amplitude 3.5 mm,
9 to 150 Hz acceleration 9.8 m/s
10 sweeps each in X, Y and Z directions (1 octave/min)
2
147 m/s , 3 times on 3 axes
EMC Directive: EN61131-2
1000 V [P-P] or more, Pulse width 50 ns, 1s between power supply
terminals (based on in-house measurements)
IP67 (Initial value, evaluated by us)
Dustproof and waterproof from front panel only (packing used on panel
contact surface)
Approx. 240 g
Specifications
Note1)
2
,
Note3)
Note2)