Sound Output Specifications (Gt32T1 Only) - Panasonic GT32-R User Manual

Ethernet port (GT32T1 only)
Item
Communication standard
Connector shape
Transmission distance
Applicable cable
Auto MDI-X
SPEED lamp
LINK/ACT lamp
Note1) Data processing in the main unit is carried out with the serial communication of 115.2 kbps.
Note2) Take care of handling of the connector not to add an excessive static electricity on the metal part
of the connector.
Note3) Do not use a STP cable (shielded wire).
Note4) Ethernet is a trademark of Xerox Corporation, USA.
Note5) Simultaneous communication with the USB port is not achievable.
SD memory card slot
Item
Support media
Supported format standard
Note1) Check the usable temperature range of a SD memory card to be used before use.
Note2) The SD access lamp turns on while accessing the SD memory card.

6.9.5 Sound Output Specifications (GT32T1 Only)

Item
File format
Max. sound data capacity
Max. registered No. of
sound data
Sound output voltage
Output terminal
Connecting amplifier
6-38
IEEE802.8u/100BASE-TX IEEE802.3/10BASE-T
Note2)
Plug-in phone jack
Max. 100 m
UTP cable (Unshielded wire) Category 5
Supported
Light on: During 100BASE-TX communication
Blinking: During 10BASE-TX communication
Light on: When linked
Blinking: During data reception.
We recommend SLC SD memory cards and SLC SDHC memory cards.
For details on operation confirmed SD memory card and SDHC
memory card, visit
"https://industrial.panasonic.com/ac/e/fasys/information/sd-
card/index.jsp".
Conforms to SD standard.
(Please download formatting software for SD memory cards from the
SD Association website.)
WAV format (PCM format, sampling 8 KHz, 16 bits monaural)
512 kbytes (Approx. 30 seconds)
128
2 Vp-p
3.5 stereo mini jack
Input impedance 10 k or more
Specifications
GT32T1
Note1)
Note3)
Specifications
Specifications
GT32T1