Gt11; General Specifications (Gt11) - Panasonic GT32-R User Manual

6.6 GT11

6.6.1 General Specifications (GT11)

Item
Rated voltage
Operating voltage range
Power consumption
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Breakdown voltage
Insulation resistance
Vibration resistance
Shock resistance
EC Directive applicable
Noise immunity
Protective construction
Weight
Note1) When connecting the FP programmer II to the TOOL port, it is 150 mA or less.
Note2) When connecting the FP programmer II or C-NET adapter to the TOOL port, the usable range is
0 to +45 C.
Note3) When using our exclusive cable.
Note4) When reattaching, replace waterproof packing.
6-22
24 V DC
21.6 to 26.4 V DC
2.4 W or less (100 mA or less)
0 to +50 C
Note2)
20 to 85% RH (at 25 C), non-condensing
-20 to +60 C
10 to 85% RH (at 25 C), non-condensing
Between [power supply terminals] and [case]
500 V AC for 1 minute, Cutoff current 10mA (at default setting)
Between [power supply terminals] and [case]
100 M or more, 500 V DC, measured with megohmmeter (at default
setting)
10 to 55 Hz (1-minute cycle)
Amplitude: 0.75 mm,
10 min on 3 axes
2
98 m/s or more,
4 times on 3 axes
EMC Directive: EN61000-6-2, EN61000-6-4
1000 V [P-P] or more, Pulse width 50 ns, 1s between power supply
terminals (based on in-house measurements)
IP65 (Initial value, evaluated by us)
Dustproof and drip-proof from front panel only (packing used on panel
Note4)
contact surface)
Approx. 230 g
Specifications
Note1)
Note3)