Sound Adjustment; Sdi Sound Output - Panasonic TH-65PB1U Operating Instructions Manual

SOUND Adjustment

1
2
Select to adjust each item.
3
Item
AUDIO MENU
BASS
MID
TREBLE
BALANCE
SURROUND
Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU.
Helpful Hint (
While the "SOUND" menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.

SDI SOUND OUTPUT

This menu is available only when selecting a slot that any of the following terminal boards is installed:
HD-SDI Terminal Board with audio (TY-FB10HD) or Dual Link HD-SDI Terminal Board (TY-FB11DHD)
SDI SOUND OUTPUT
LEFT CHANNEL
RIGHT CHANNEL
SOUND OUT
LEVEL METER
34
Press to display the SOUND menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Press to exit from adjust mode.
STANDARD: Emits the original sound.
DYNAMIC: Accentuates sharp sound.
CLEAR: Attenuates human voice.
Adjusts low pitch sounds.
Adjusts normal sounds.
Adjusts high pitch sound.
Adjusts left and right volumes.
Select ON or OFF.
/ Normalization)
NORMALIZE
2/2
CHANNEL 1
CHANNEL 1
OFF
OFF
Details
Item
CHANNEL 1 to CHANNEL 16
LEFT CHANNEL
Selects left audio channel.
CHANNEL 1 to CHANNEL 16
RIGHT CHANNEL
Selects right audio channel.
ON
SOUND OUT
ON:
OFF: Disables audio output.
OFF
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
LEVEL METER
OFF: Hides the audio level meter.
1-8CH: Displays the audio level meter (1-8ch)
9-16CH: Displays the audio level meter (9-16ch)
SOUND
NORMALIZE
AUDIO MENU
BASS
MID
TREBLE
BALANCE
SURROUND
Details
OFF
Enables audio output.
1-8CH 9-16CH
1/2
NORMAL
STANDARD
0
0
0
0
OFF