True UES900 Owner's Manual page 23

CHAPTER 2: ASSEMBLY INSTRUCTIONS
BIKE ASSEMBLY STEPS (continued):
Step #11 Storage Tray:
a) Insert the Storage Tray on top of the Front
Mast Mounting Plate; pay special attention to
make sure that the plastic lip of the Storage
Tray is tucked underneath the bottom of the
Console
b) Attach the Storage Tray to the Mounting
Plate by tightening all 4 screws with a Phillips
head screwdriver (not provided)
Hardware Required:
4 M5 x 8 Screws
Step #12 Console Covers:
a) Attach the Front C over (P13) to the Front
Mast using a single (X 06; medium) screw; make
sure the Front Cover ( P13) aligns with the
Storage Tray plastic.
b) Align the Back Cov er (P22) with the Front
Cover (P13) so that th e plastic fits together and
attach it to the Consol e Mounting Plate using
two (X47; short) scre ws.
c) Attach the Back Co ver (P22) to the Front
Cover (P13) using tw o (X05; long) screws.
Attach the Back Cove r (P22) to the Front Mast
using the remaining ( X06; medium) screw.
2 M5 x 20 Screws
2 M5 x 15 Screws
2 M5 x 10 Screws
Truefitness.com / 800.426.6570 / 636.272.7100 19