8
HomeSettings HA07 Wireless Master Controller
ON at a specific time
9.
Press the ENTER button to accept your settings.
The screen displays the program you have just
set with the next event number blinking.
10.
At this point you have several options:
•
If you want to make any changes in the
settings for this event, press the + button and
return to Step 3. Work your way through the
steps as necessary and make the necessary
changes.
•
If you want to set up another
event, press the ENTER
button. The screen Displays
the next event for setting up.
Proceed with instructions for setting an ON
event.
•
If you're finished setting up events, press the
MODE button to exit programming and enter
AUTO mode, which activates your settings.
Before you begin
If there are any dimmer-controlled lights in the
scenes you will control with this event, set them at
the dimmed level where you want them.
1.
If necessary, press the MODE
button repeatedly until the top
of the screen displays "PGM".
2.
Press the ENTER button as
necessary to display blank dashes for entering a
time, and with the event number blinking. This is
a new event.
Copyright © 2007 Intermatic, Inc.