Setting For Daylight Saving Time - Intermatic HA07 Setup And User Manual

0
HomeSettings HA07 Wireless Master Controller

Setting for Daylight Saving Time

The HA07 Master Controller is preset to
automatically adjust for daylight saving time.
• If you DO want to keep this setting:
a. Press the ENTER button to accept automatic
DST. The screen flashes back
and forth between "ZONE"
and "CENTer".
b. Continue with instructions
for "Setting for the Zone for
the location" on the next
page.
• If you DO NOT want the Controller to
automatically adjust for daylight saving time
(perhaps there is no daylight saving time where
you live):
a. If necessary, press the
MODE button until the
screen displays "SETUP"
mode and flashes back and
forth between "dST" and
"AUTO".
b. Press the + or – button to toggle the display
back and forth between flashing "OFF" or
flashing "AUTO".
c. Make sure the display is flashing "OFF".
Copyright © 2007 Intermatic, Inc.