6
HomeSettings HA07 Wireless Master Controller
Installing the batteries
Installing the batteries
Installing the batteries
How to use this booklet
How to use this booklet
How to use this booklet
1.
Open the battery compartment door located on
the back of the remote control:
a.
Press down on the battery compartment tab.
b.
Pull the door outward.
2.
Insert 4 size "AA" alkaline
batteries (not included).
NOTE: Be sure the batteries are
pointing in the direction shown
in the battery compartment.
3.
Replace the battery compartment door:
a.
Insert the 2 tabs at the bottom of the door.
b.
Press the door in until the door clicks shut.
Before you begin setting up your HA07, read this
booklet to get an overview of the process.
Some of the steps require you to press and release
a specific button. Others require you to press and
hold a button while performing another task. We
suggest that you highlight these instructions so
when you come to them, you'll feel confident.
Remember: If you go step-by-step, you'll do just
fine.
Copyright © 2007 Intermatic, Inc.