Activating All On / All Off For Non-Dim Modules - Intermatic HA07 Setup And User Manual

Activating ALL ON / ALL OFF for non-dim modules

6. Now release the INCLUDE button on the Master
Controller. Three things happen automatically:
• The screen displays
"SUCCESSFUL" for
2 seconds
• The LED on the
module flashes for 2 seconds
• The ON/OFF or DIM level you set is saved
7. The module is now associated with the channel
(the ON and OFF buttons) and at the light level
you have selected.
8. Press the ON/DIM and OFF/DIM buttons to test the
scene and make sure the scene works OK.
You can add a maximum of 16 modules to the same
scene, or create a new scene with different or some
of the same modules. To do so, repeat Steps 1-10.
In their original setting, the ALL ON and ALL OFF
buttons only control modules that DIM (e.g., HA03,
HA05, or HA06). This is because you might connect
a coffee pot or other appliance to an ON/OFF-only
module, and wouldn't want it to be included every
time you turn want an ALL ON or ALL OFF with
your lights.
Use the following procedure only if you want one
of or more these modules to be activated by the
ALL ON and ALL OFF buttons.
Providing a brighter solution.™
Setup and User Guide
15