HomeSettings HA07 Wireless Master Controller
Making adjustments to events
Any time you want to make adjustments to the
settings of any event you have set up, go back to
the four master procedures:
Astronomic-controlled (sunrise or sunset)—
explained on page 24.
Timer-controlled—explained on page 28.
1.
Press the MODE button to display "PGM".
2.
Press the MODE button to cycle through the
events you have created, stopping at the event
you want to change.
3.
Press the MODE button to cycle through the
stages of the event, stopping at the part you
want to change.
4.
Make the change.
5.
Press the MODE button to exit programming.
Copyright © 2007 Intermatic, Inc.