Setting Exact Sunrise/Sunset Times (Optional) - Intermatic HA07 Setup And User Manual


HomeSettings HA07 Wireless Master Controller
3. Press ENTER to accept the
zone you have set. The screen
displays "SETUP" mode and
flashes back and forth between
"SUNUp" and a time (it may
be a different time than shown
here).

Setting exact sunrise/sunset times (optional)

When you choose the zone for where you live, the
HA07 uses an approximate time for sunrise and
sunset, adjusting it automatically as the seasons
change (earlier sunset in winter, etc.)
You can set the exact sunrise/sunset times, which
are available in the newspaper or on the Internet.
• If you DO NOT want to set exact times, skip this
procedure as follows:
a. Press the MODE button. The
screen displays "PGM".
b. Continue with instructions
for "Programming timer
events" on page 24.
• If you DO want to set exact times, use the
procedure below:
a. Press the + or – button. The
screen flashes the time it has
been displaying.
b. Press the + or – buttons
again to change the flashing
time to the correct SUNRISE
time for the location.
Copyright © 2007 Intermatic, Inc.