Setting Daylight Saving Time & Zone - Intermatic HA07 Instructions Manual

Setting Daylight Saving Time (dST) and Zone
1. (See Fig 5a) Press MODE until the SETUP mode is shown.
2. The controller is programmed to automatically adjust for
daylight saving time (dST). If you want to keep this setting,
press ENTER to go to ZONE. Skip to step 4.
3. If you do not want dST, press + or - . The display will read
OFF. (See Fig 5b) (Pressing the + or – button a second
time will toggle the dST selection back to "AUTO".)
Press ENTER to go to ZONE.
4. (See Fig 5c) ZONE CENTER will flash. Press + button
and select the proper zone for your location. Press
ENTER when your zone is set. Zones are divided
between North, Central and South (See Fig 5d).
Fig 5a – SETUP mode
Page 11 of 35
Fig 5b – dST setting