Installing The Holder - mr. steam Tempo/Plus Control Owner's Manual

Installing the TEMPO/REMOTE Holder
®
A holder is provided with the TEMPO/REMOTE
®
Control as an optional convenience.
Mount the holder in a location away from direct steam emission.
Secure the holder to a wall so the TEMPO/REMOTE is oriented in the upright
®
position as shown. Determine if the two screws provided are suitable for the
installation conditions.
Use alternate hardware or use with plastic anchors as required by installation
conditions.
Seal screw holes in the wall against moisture as required.
TEMPO / TEMPO/PLUS / TEMPO/REMOTE / TEMPO/EXT • Owner's Manual 19
® ® ® ®