Battery Replacement - mr. steam Tempo/Plus Control Owner's Manual

Battery Replacement

Your remote control is powered by two AAA batteries.
Note: Before you start it's important to note that you have only 3 minutes to change batteries
if you want to retain codes recorded in the memory!
Cap
1• Unscrew and remove bottom cap.
Note: You can use a coin to unscrew cap.
2• Insert new batteries, making sure to match
plus (+) ends with the plus markings on
the battery case.
After replacing batteries:
LED indicator will flash twice indicating that
programmed codes are still in memory.
If LED indicator flashes 3 times, it means that
programmed code settings have been erased,
re-enter the code per instructions on page 15.
18
-
3• Replace cap ensuring that waterproof
TEMPO / TEMPO/PLUS / TEMPO/REMOTE
® ®
+
gaskets are in position.
/ TEMPO/EXT
®
• Owner's Manual
®