Furnace Top/Back Removal - Katanax K2 Prime Manual

6. Gently straighten the leads, back to their original position.
7. Re-install the heating elements, as described in the previous section.
Furnace
top/back
removal
In order to access the door opening springs, the door safety microswitch and the
thermocouple bracket, the top/back of the furnace must be removed.
1. Disconnect the instrument from the wall outlet.
2. Locate and remove the screws, as indicated below
80
IMPORTANT: Always disconnect the instrument from the power outlet when
working with panels removed. 240 Volts inside! Risk of electrocution!