Table of Contents
Advertisement
Mold holder
assembly
In this section, you will find essential information needed to properly assemble
mold holders. Please follow the instructions carefully, or pouring issues could
occur.
1. If your mold holder is not fully assembled, or if you have to switch from one
Mold side tab
Mold holder
support
Metallic spacer
Grooved tube
Ceramic tube
(340 mm)
2. Assembly and adjustment are described in the following section.
mold size to another, first check that you have the following parts, available
either individually or as pre-packaged kits.
NOTE: The following description relates to 6-position mold holders. If your
holder is configured for 5 positions, the assembly will be different. Contact
Katanax if unsure.
Nominal mold dimension (mm)
Complete holder part number
Part name
Part number
Ceramic
KP0137A or
tube
KP0137T (pack of 10)
(340 mm
long)
Mold side
30mm:KP6730A
tab
32mm:KP6732A
35mm:KP6735A
40mm:KP6740A
Grooved
30mm: KP6731A
ceramic tube
32mm: KP6733A
35mm: KP6736A
40mm: KP6741A
Mold holder
KP6138A (left side)
support
KP6139A (right side)
Mold holder
30mm:KP6630A
metallic
32mm:KP6632A
spacer
35mm:KP6635A
40mm:KP6640A
30
32
KP6603A
KP6604A
KP6605A
Quantity required
2
6
1
1
1
2
35
40
KP6606A
67
Advertisement
Table of Contents
