Managing Fusion Methods - Katanax K2 Prime Manual

If you make a mistake while typing, press CR ("clear").
If you summoned the numeric keypad by error, you can close it by pressing ES
("escape").
Once the password is correctly typed, press ENT ("enter") to confirm. The numeric
To close the advanced mode (i.e. "re-lock" the padlock), simply click the icon and
enter an incorrect password on the numeric keypad.
Managing
fusion methods
Fusion methods can be managed just like files on a computer. In the main screen,
you can press the icon corresponding to Copy, Delete and Save. Note, however,
that the "advanced mode" but first be accessed in order to perform any of the
following actions.
Copying
the icon, a window will ask for a confirmation. Click "Yes" to proceed, or "No" to
cancel.
Renaming
Once a method is copied, you will be automatically brought into that copied
program, named "Untitled". We suggest that you immediately rename this with
some name that is relevant to your application. To rename the program, click on
its name (in this case, "Untitled"), and a full keyboard will pop up. (Note that
renaming a preset program is not allowed.)
Deleting
Saving
38
keypad will close, and the padlock icon will now be displayed as
unlocked.
This icon informs you that you can now modify the fusion program
parameters, but also manage the fusion methods (i.e. copy, delete
and save). You are now in "advanced mode".
NOTE: It is not possible to modify the parameters in the preset programs, and
so even entering the correct password will not "unlock" the padlock icon.
However, the instrument remains in "advanced mode", and switching to a
custom fusion program will unlock the padlock and allow parameter edition.
The Copy button is useful to duplicate an existing program, to create a
derived recipe. Hence, begin with a preset program that is close to the
sample type you want to process, and then you will be able to fine-
tune the parameters to suite your specific sample. After clicking on
The Delete button is used to erase a program from memory. Once a
program is erased, it frees the corresponding memory slot, and it
cannot be recovered. Furthermore, preset programs cannot be
deleted.
The Save button is used to write the current program and its