Table of Contents
Advertisement
Twisting correction
post
Ceramic axle
Mold holder
removal
64
IMPORTANT: The middle section of the crucible holder must remain gently
compressed longitudinally at all times, or the ceramic rods, tubes and spacers will
fall. Using the elastic band with two clips, originally provided with the complete
crucible holder, is recommended for this operation.
1.2 Take the crucible holder assembly and just follow the removal procedure
backwards (see page 60). Do not forget to pull the locking handle up to
allow for the extra movement required for easy installation.
1. Mold holder removal – middle section
1.1
With the crucible holder removed (at least the middle section), the mold
holder removal is now possible.
1.2
Lift the front end of the metal mold tabs and gently pull them all out.
Advertisement
Table of Contents
