Zavoli GE Manual page 27

3.16 Installation of the electrovalve and screw top
To install the electrovalve, refer to pictures 3.16 and 3.16-1. Please make sure the valve is placed
in the same position shown in the pictures. Fasten the screw top (5Nm).
Fig. 3.16
Fig. 3.16-2
3.17 Installation of the screw top
To install the screw top, please refer to the following pictures:
Fig. 3.17
ZAVOLI s.r.l. Via Pitagora n° 400 47023 Fr. Case Castagnoli, CESENA (FC), Italy
Technical Directions
for the Overhaul of
GE – GES – GEX – GEXL
Regulators/Vaporizers
Page 27 of 32
Tel. (+39) 0547/ 646409 – Telefax (+39) 0547 / 646411
Web site: www.zavoli.com E-mail:
Fig. 3.16-1
Fig. 3.16-3
Fig. 3.17-1
zavoli@zavoli.com
DT_IS_RG-007.00-E
09/10/2009