Installation Of The; Stage Cover; Installation Of The Bleed Valve Screw Top - Zavoli GE Manual

3.9 Installation of the 2

Place the cover on the regulator/vaporizer and, with the help of a Phillips screwdriver (3 Nm),
fasten the screws.
Fig. 3.9
3.10

Installation of the bleed valve screw top

To install the bleed valve screw top, twist the top on by hand, as shown in Fig. 3.10 and 3.10-1.
Fig. 3.10
ZAVOLI s.r.l. Via Pitagora n° 400 47023 Fr. Case Castagnoli, CESENA (FC), Italy
Technical Directions
for the Overhaul of
GE – GES – GEX – GEXL
Regulators/Vaporizers
nd

stage cover

Page 21 of 32
Tel. (+39) 0547/ 646409 – Telefax (+39) 0547 / 646411
Web site: www.zavoli.com
Fig. 3.9-1
Fig. 3.10-1
E-mail: zavoli@zavoli.com
DT_IS_RG-007.00-E
09/10/2009