Installation Of The Water Inlet/Outlet Connections - Zavoli GE Manual

3.13

Installation of the water inlet/outlet connections

Before proceeding to install the water inlet/outlet connections, grease the inside of their seats as
shown in Fig. 3.13 and 3.13-1. Then, secure the connections into place with a Phillips
screwdriver.
Fig. 3.13
Fig. 3.13-2
ZAVOLI s.r.l. Via Pitagora n° 400 47023 Fr. Case Castagnoli, CESENA (FC), Italy
Technical Directions
for the Overhaul of
GE – GES – GEX – GEXL
Regulators/Vaporizers
Page 25 of 32
Tel. (+39) 0547/ 646409 – Telefax (+39) 0547 / 646411
Web site: www.zavoli.com E-mail:
Fig. 3.13-1
Fig. 3.13-3
zavoli@zavoli.com
DT_IS_RG-007.00-E
09/10/2009