Installation Of The Electrovalve Piston Rubber Top; Installation Of The; St Stage Lever - Zavoli GE Manual

3.3 Installation of the electrovalve piston rubber top

Put the cut-off valve in place, as shown in Fig. 3.3. While pressing the valve down to insert it in
its seat, turn the piston clockwise. (Fig. 3.3-1)
Fig. 3.3

3.4 Installation of the 1

Insert the pin in the lever holes as shown in the pictures, and with a Phillips screwdriver secure
the 2 headless screws (threaded rods) into their seats.
Fig. 10-1
ZAVOLI s.r.l. Via Pitagora n° 400 47023 Fr. Case Castagnoli, CESENA (FC), Italy
Technical Directions
for the Overhaul of
GE – GES – GEX – GEXL
Regulators/Vaporizers
Fig. 3.2-4
st
stage lever
Page 16 of 32
Tel. (+39) 0547/ 646409 – Telefax (+39) 0547 / 646411
Web site: www.zavoli.com
Fig. 3.3-1
Fig. 10-2
E-mail: zavoli@zavoli.com
DT_IS_RG-007.00-E
09/10/2009
Lever-
supporting
pin.