Table of Contents
Advertisement
Available languages
Available languages
V1.0
1.
Always check for leaks wearing a face shield, safety goggles,
rubberized gloves and protective clothes.
2.
Release all pressure from the system before you inspect it.
3.
Do not use your hands to detect a fluid leak. Use a large piece of wood,
cardboard or paper and watch for discolouration.
4.
Replace damaged parts with identical manufacturer's components to
ensure it is rated to handle the pressure.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace
the missing part before operating. Failure to do so could result in
a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect for
damage. Make sure that all items in the contents are included.
Contents: • Lever Grease Gun •
IDENTIFICATION KEY
A
Coupler
B
Pipe
C
Head Unit
D
Barrel
E
Handle
F
End Cap
G
Lock Lever
H
Plunger Rod Handle
ASSEMBLY & INSTALLATION
CARTRIDGE LOADING
1.
Unscrew the grease gun head (C) from the barrel counter-clockwise.
2.
Pull back the plunger rod handle (H) all the way and lock it with the
lock lever (G).
3.
Remove the plastic cap from the open end of the grease cartridge
and fully insert it into the empty barrel (D). Make sure the rim of the
cartridge is seated on the rim of the barrel.
Visit www.princessauto.com for more information
Lever Grease Gun
Steel Pipe
8886400
• 4-Jaw Coupler
Fig. 1
5
Advertisement
Table of Contents
