Operation Panel And Display Of Error - Citizen CBM-270 User Manual

4.11

Operation Panel and Display of Error

1. POWER lamp (Green)
Illuminated if the power is turned on.
2. ERROR lamp (Red), PAPER lamp (Red)
Indicates an error by illuminating or blinking the lamps.
Error
Memory check error
Head-up
Head overheat
Paper near end
Paper end
Macro execution wait
Label paper cut wait
Label paper error
<Error Details>
Head-up
Head overheat
Paper near end
Paper end
Label paper error
3. FEED switch
See "4.6 FEED Switch Function."
ERROR Lamp
Quick blinking
ON
ON
OFF
OFF
Slow blinking
OFF
ON
----- Occurs when the head-up lever is raised.
The parallel interface outputs BUSY and FAULT, and serial interface DTR,
respectively.
----- If the temperature of the printing head rises (About 60°C or more), in order to
protect it against overheating, a printing head temperature sensor will be activated to
stop printing.
interface DTR, respectively.
be automatically resumed.
----- If the diameter of the paper roll decreases, the paper near end sensor will react to
inform you that the paper roll is running out. See "4.8 Paper Near End Functio n".
----- If the paper roll runs out, the paper sensor near the printing head will react to stop
printing. See "4.7 Paper End Function".
----- Occurs if you set the thermal paper or non-specified label paper, when the label
paper has been selected.
serial interface DTR, respectively.
Display
PAPER Lamp
OFF
OFF
OFF
ON
ON
OFF
Slow blinking
ON
The parallel interface outputs BUSY and FAULT, and serial
If the temperature drops (About 55°C), printing will
The parallel interface outputs BUSY and FAULT, and
16
CBM-270 User's Manual
Reset
Cannot be reset
Lower the head-up lever.
Automatically reset
temperature drop
Set a new paper roll after a print
stop.
Set a new paper roll.
Press the FEED switch.
Press the FEED switch.
Set the label paper suitable for the
specifications.
The printer cannot feed the paper or print.
by a
CITIZEN