Table of Contents
Advertisement
2-5. Expanding Signal Output Range
Depending on the external device, the black and white levels in the video signal output to the monitor
may be restricted. If the signal is displayed on the monitor in its restricted form, the blacks will be faint,
the whites dull, and contrast will be reduced. The brightness range of such signals can be extended to
match the actual contrast ratio of the monitor.
Setting
Auto
The monitor automatically recognizes the brightness range of input signals and displays
images appropriately.
Full
The input signal brightness range is not extended.
109% white
The brightness range of the input signal is extended from 16–254 (10-bit: 64–1019) to
0–255 (10-bit: 0–1023) for display.
Limited
The brightness range of the input signal is extended from 16–235 (10-bit: 64–940) to
0–255 (10-bit: 0–1023) for display.
Procedure
1. Choose "Screen" from the Adjustment menu, and press
2. Choose "Input Range" from "Screen", and press
3. Select "Auto", "Full", "109% white", or "Limited" with
Attention
• When the DVI signal is input, "Auto" cannot be selected.
4. Press
after completing the setting.
Function
.
.
or .
Chapter 2 Adjusting Screens
27
Advertisement
Table of Contents
