Table of Contents
Advertisement
●
To adjust gamma
Gamma can be adjusted. The brightness of the monitor varies depending on the input signal,
however, the variation rate is not simply proportional to the input signal. The control performed to
keep the balance between the input signal and the brightness of the monitor is called "Gamma
correction".
Setting
1.6 to 2.7
Adobe®RGB
sRGB
EBU
REC709
REC1886
SMPTE-C
DCI
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Gamma" from "Color", and press
3. Use
or
for adjustment.
4. Press
Note
• The gamma curve can be adjusted to L* by using SelfCalibration or ColorNavigator 6. For details,
see
"4-4. Setting the calibration targets" (page 38)
CD-ROM).
• L* is a gamma curve defined in CIE1976 that is perceptually uniform.
●
To set color gamut
Set the color reproduction area (color gamut). "Color gamut" is the range of colors that devices such
as monitors, digital cameras and printers can express. Various standards are defined.
Setting
Native
Adobe®RGB
sRGB
EBU
REC709
REC1886
SMPTE-C
DCI
Procedure
1. Choose "Color" from the Adjustment menu, and press
2. Choose "Color Gamut" from "Color", and press
3. Use
or
for adjustment.
4. Press
Note
• The method of displaying colors outside the monitor's displayable range within the defined color gamut can
be set. For details, see
22
Chapter 2 Adjusting Screens
Set the gamma value.
Set the gamma curve defined by Adobe®RGB.
Set the gamma curve defined by sRGB.
Set the gamma curve defined by EBU.
Set the gamma curve defined by REC709.
Set the gamma curve defined by REC1886.
Set the gamma curve defined by SMPTE-C.
Set the gamma curve defined by DCI.
after completing the setting.
Display images in the monitor's original color gamut.
Display images in the color gamut defined by Adobe®RGB.
Display images in the color gamut defined by sRGB.
Display images in the color gamut defined by EBU.
Display images in the color gamut defined by REC709.
Display images in the color gamut defined by REC1886.
Display images in the color gamut defined by SMPTE-C.
Display images in the color gamut defined by DCI.
after completing the setting.
"To set clipping" (page
Purpose
.
.
or the ColorNavigator 6 User's Manual (stored on the
Purpose
.
.
24).
Advertisement
Table of Contents
