Reading Your Display; Icons - Geo Solo II CT User Manual

Reading your display

Icons

Signal strength
The signal strength icon shows the
quality of the radio connection to
the transmitter. If
communication
moving the display and the transmitter
closer together.
Battery
The will flash when the batteries in the
transmitter are running low. If you lose
power altogether the transmitter will not
be recording any data.
Cloud
(with optional web pack)
When the icon is on solid without
flashing it means the Solo II is paired to
the optional bridge and connected to the
internet.
When the icon is flashing it means
the Solo II is paired to the bridge but not
connected to the internet (this maybe
because the bridge is not connected to
the router). For more information please
see page 10.
12
is flashing the
is intermittent.
Tariff
The money bags light up to tell you which
of your tariffs is currently active and are a
handy reminder for when your electricity
is costing you the least.
Try
One tariff: only one money bag will
light up.
Two tariffs (e.g. day and night): two
money bags will light up during the day
(higher rate) and one at night (lower rate).
Three tariffs: three money bags will light
up during the day, two on your middle rate
and one on the lowest.
When the tariff you are on is due to change
in the next 30 minutes the money bag of
that tariff will flash.
Background load indicator
The background load is the sum of all
the appliances in your home that are
permanently on or on standby. It is
calculated by the Solo II and continuously
monitored
seasonal changes and other permanent or
semi-permanent changes in the home.
If there is a change to the background
load of more than 30W the background
load indicator will light up to warn you
that you may have left an appliance on
by mistake. For more information see the
FAQs section.
and updated throughout
Solo II CT: Consumption