Geo Solo II CT User Manual page 20

1. Scroll down the page to the Smart Plug
Pairing section.
2. Hover your cursor over Add for the
Smart Plug you would like to pair.
3. Click on the Add Smart Plug link that
becomes available. The system will
now give you five minutes to complete
the next steps.
4. With the Smart Plug plugged into
a mains socket, press and hold the
button on the front for 10 seconds until
the button colour changes to amber.
It will pair with the system after a few
seconds. Energynote will confirm a
successful pairing.
European plug socket
UK plug socket
You can now label the Smart Plug choosing
from a drop-down menu.
20
Renaming a Smart Plug
1. From your home screen on the
energynote site, click on the settings
link in the top right hand corner.
2. Scroll down the page to the Smart Plug
Pairing section.
3. Hover your cursor over the Smart Plug
you would like to rename.
4. Click on the label device link that
becomes available
from one of the options in the
drop-down list.
5. Click set to confirm.
and choose
Solo II CT: Consumption