Table of Contents
Advertisement
Welcome to geo's energy management
service. You'll find everything you need
here to gain visibility and control of your
consumption. Your new Solo II will help
you manage, regulate and visualise your
energy use – supporting you as you learn
more and more about energy efficiency.
In this guide you'll find everything you
need to quickly and simply set up and start
using your display. You'll also find more
information about how the monitor works
and how it can help you. In consumption
mode you can use the display to help you
reduce CO₂ and save money by giving
you real-time, visual feedback on your
energy consumption.
Using the optional Web Pack, you will
also have access to energynote, our
online energy management service that
presents all your data in greater detail.
There is no limit to the amount of data
you can upload. See, analyse and explore
for years to come.
You should find everything you need in
this guide, but if you don't, get in touch
and we'll be happy to help.
Solo II CT: Consumption
Microgeneration and
consumption modes
Solo
II
The
can
consumption (default) or microgeneration
– but not at the same time. Please note
that when you have chosen either of
these modes then it is not advisable to
switch to the other. If you do, you will lose
the data you have been collecting (from
whichever mode you had previously set
up). If you choose to switch modes, the
display will reset to day one.
SAFETY INFORMATION
Keep the display away from water
Clean with a soft, dry cloth
If any of the components appear
damaged, contact us
This is a self-installing display. There
is no need for you to connect or
disconnect any cabling – and you won't
need access to your electricity meter
Do not fit rechargeable batteries
To protect the environment, please
take your batteries to a recycling centre
for safe disposal
For use in a dry, indoor environment
only
Please only use the power supply
provided
This product is RoHS compliant and
CE approved
measure
either
3
Advertisement
Table of Contents
