Foundation/Benchtop; Clearances; Moving The Equipment; Dimensions - Microfluidics MICROFLUIDIZER LV1 Series User Manual

Foundation/Benchtop

The foundation or benchtop of the proposed operating site MUST be able to support the gross
weight of the Microfluidizer equipment, including oil.

Clearances

A minimum clearance of 10 inches (25.4 cm) around all sides of the Microfluidizer equipment is
required.

Moving the Equipment

A forklift or a hand truck should be used when lifting the Microfluidizer equipment from the
shipping crate to its new location. Make certain the lifting device is rated for the maximum weight
of the equipment. See below for forklift location.
Lift with forklift here

Dimensions

Width
51.0 cm
(20 in)

Utility Requirements

Electrical (General)

Electrical requirements vary by location.
Voltage
110/208 to 230VAC
208 to 230VAC
3-LV-1-7 9/7/11
Chapter 3: Operation
Height
60.2 cm
(23.7 in.)
Current
10/5
5 Amps
LV1 User Manual
Depth
(65 cm)
(25.8 in)
Phase
1
1
Weight (with oil)
(109 kg)
(240 lb.)
Frequency
60 Hz
50 Hz
3-4