Master Arm Test (If Applicable) - Bluerprint Lab REACH BRAVO Integration Manual

6.2.2 MASTER ARM TEST (IF APPLICABLE)

1) Set up the Master Arm with the stand
provided.
3) Once powered, the Master Arm buttons will flash blue.
4) Open Reach Control, Settings (Cog Icon) > Ports > Add.
Assign the new port a Name and select the comm port the Master Arm is communicating on. Ensure
half duplex is selected.
Blueprint Lab Confidential Proprietary Information not to be reproduced or made available to third parties without prior consent from
Blueprint Lab and not to be used in any unauthorised way. © Blueprint Lab Pty Ltd 2021
2) Connect Master Arm to the computer via
USB.
Page 33 of 37