Icom IC-M59 Instruction Manual page 25

D ADDRESS
This item sets the other station's 10-digit ID code for individual
calls. Note that your own ID cannot be set in SET mode.
➀
Push [9] to select the digit (1 through 10).
➁ Rotate [CHANNEL] to set the desired value for the selected
digit or turn the individual call OFF.
• Select "–" to clear the digit and turn the individual call OFF.
10th digit set to "0"
[EXAMPLE]: Setting the ID code to 6042737400
Push
NOTE: The 10th digit must be
set to "0" when your ID is 9 dig-
its This is reserved for future
use.
9
D ACKNOWLEDGEMENT METHOD
This item sets the acknowledgement method for reply to a
calling station when receiving an individual call. (See p. 18)
Full automatic
Acknowledgement is transmitted au-
tomatically using the specified mes-
sage.
Semi automatic
Acknowledgement
manually. If no transmission for 4.5
min., acknowledgement is transmit-
ted automatically using the "Unable to
comply" message.
Manual
Acknowledgement can only be trans-
mitted manually.
D AUTO ACKNOWLEDGE CONTENTS
Appears only when full automatic (FA) is selected in the previ-
ous item. This item sets "unable to comply" or "able to comply"
Able to comply
as the full automatic acknowledgement transmission. (p. 18)
5
SET MODE
is transmitted
Unable to comply
21