Specifications; I Specifications - Icom IC-M402 Instruction Manual

I Specifications
ï ï General
• Frequency coverage :
Transmit
Receive
• Mode : FM (16K0G3E)
• Channel spacing : 25 kHz
• Current drain (at 13.8 V) : Tx 6.0 A (at 25 W output).
• Power supply requirement : 13.8 V DC ±15%
• Operating temperature range : –20°C to +60°C; –4°F to +140°F
: 153(W) × 67(H) × 141.6(D) mm
• Dimensions
(Projection not included)
• Weight : 900 g ; 2 lb
ï ï Transmitter
• Output power : High
• Modulation system : Variable reactance frequency
• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than –70 dB
156.025–157.425 MHz
156.050–163.275 MHz
DSC(16K0G2B)
Rx 1.2 A (at AF max.)
(W) × 2
1 5 9
6 / / (H)× 5 / (D) in
32 8 16
25 W
Low 1 W
modulation

SPECIFICATIONS

ï ï Receiver
• Receive system : Double conversion
• Sensitivity (12 dB SINAD) : 0.25µV
• Squelch sensitivity : 0.20µV (typical)
• Intermodulation rejection ratio : 70 dB
• Spurious response
rejection ratio : 70 dB
• Adjacent channel selectivity : 70 dB
• Audio output power : 4.5W (typical) at 10% distortion with
• GPS interface : NMEA0183 ver.2.0
All stated specifications are subject to change without notice or
obligation.
13
superheterodyne
a 4 Ω load
40