Icom IC-M402 Instruction Manual page 21

6
DSC OPERATION
ï ï Transmitting position request call
Transmit a position request call when you want to know your
friend's current position, etc.
q Select a desired channel other than Ch 70.
w Push [DSC] to select the DSC menu.
e Push [Y]/[Z] to select "POS RE-
QUEST."
r Push [Y]/[Z] to select the desired
pre-programmed individual address.
•The ID code for position request can be
set in advance. (p. 16)
t Push [DSC] to enter pre-programmed individual address.
•"OK" appears.
y Push [DSC] to transmit the position request call.
• Ch 70 is selected and the position re-
quest call is transmitted.
u The position request call has been
transmitted.
• "WAITING ACK" scrolls.
i Push [PTT] or rotate the channel se-
lector to exit the condition.
15
ï ï Transmitting position reply call
Transmit a position reply call when a position request call is
received.
q "DSC" appears and a"RCV Pos re-
quest" scrolls in the display.
w Push [DSC] to reply to the position request call; push [H/L]
to ignore the position request call.