Set Mode - Icom IC-M3A Instruction Manual

D Weather alert function
NOAA broadcast stations transmit weather alert tones before
important weather announcements. When the weather alert
function is turned ON, the transceiver detects the alert, then
flashes the "ALT" indicator until the transceiver is operated.
The previously selected (used) weather channel is checked
periodically during standby or while scanning.
• "ALT" appears when the function is set ON.
Weather alert function OFF (default)
D Scan type selection
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring channel 16.
Normal scan (default)
"AL"
"SC"
Priority scan
D Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until a received signal disappears. When ON is selected, the
scan pauses for 5 sec. after receiving a signal and then re-
sumes even if the signal is still being received.
Scan timer OFF (default)
D Auto power save function
The power save function reduces current drain by deactivat-
ing the receiver circuit for preset intervals.
Power save ON (default)

SET MODE

"St"
"PS"
6
13