Connection & Installation - Amcrest IP4M-1041B User Manual

Connection & Installation
This section provides information about the connection and installation of your camera.
Connection Guide
The camera initially should be connected via the following method:
•
WiFi Connection
•
Ethernet Connection
Inserting a MicroSD Card
A microSD card is required to store events outside of the Amcrest Cloud. Please ensure a microSD card is inserted
before physically installing the camera. The camera is compatible up to 256GB and requires a Class 10 or higher
microSD card to function. It is highly recommended to ensure the microSD card is properly formatted to FAT32
before proceeding.
To insert a microSD card, lift the front of the camera to access the microSD card slot and insert the microSD card,
gold pins down, and press in to secure.
Note: Be sure not to touch the lens when manually raising the camera. Touching the lens may smudge or degrade
the lens. Do not force the camera upward as any additional pressure to the device may damage the camera.
Installation Guide
To install the camera using the included mounting bracket you will need the following items:
6