Amcrest IP4M-1041B User Manual page 11

9. If you wish to enable WiFi on your WiFi camera, tap
Scan to scan and select your WiFi network from the
WiFi Network List. Enter the password for your WiFi
network onto the Password field. When the WiFi
password has been entered, tap Next to continue.
Note: For Android 8.0 and above users, you will have to enable location permissions to be able to scan for your
WiFi network.
For more information about the Amcrest Cloud app and its features, visit
Amcrest View Pro Setup
•
Make sure your camera is plugged into a power source and your Ethernet cable is connected from the camera to
your router.
•
Make sure your camera and mobile device are on the same network during setup.
1. Download and open the Amcrest View Pro app from the App Store or Play Store.
2. Open the app and tap on the + symbol in the middle
of the screen to begin adding your WiFi device.
10. Confirm and adjust any needed settings for your
camera. When all settings have been confirmed, tap
Finish.
amcrest.com/support
3. Tap on Add Device to add a new device to your app.
11