Icom IC-T7H Instruction Manual page 23

D Memory (skip) scan
ALL CHANNEL SCAN
Not yet
programmed
Mch 2 Mch 3
Mch 1
Mch 60 Mch 11
BAND SELECT SCAN (Example: 144 MHz band)
Not yet
VHF programmed
Mch 2 Mch 3
VHF
Mch 1
Mch 60 Mch 11
VHF VHF
ALL CHANNEL SCAN: Repeatedly scans all programmed
memories, except for those set as skip channels.
BAND SELECT SCAN: Repeatedly scans all memories with
programmed frequencies in the 144 MHz band or 430(440)
MHz band, except for those set as skip channels.
Mch 4 Mch 5 Mch 6
Mch 7
SKIP
Mch 10 Mch 9 Mch 8
UHF UHF VHF
Mch 4 Mch 5 Mch 6
Mch 7
UHF
SKIP
Mch 10 Mch 9 Mch 8
VHF VHF
ADVANCED FUNCTIONS
Push [MR] to select memory mode.
While pushing [ SCAN] rotate the tuning dial to se-
(BAND)
lect the desired band.
The following scan bands are selectable:
• "SEL ALL" for all channel scan.
• "SEL 144" for selected band scan of the 144 MHz band.
• "SEL 430" or "SEL 440" for selected band scan of the
430(440) MHz band, depending on version.
After releasing [ SCAN], the selected scan starts.
(BAND)
To activate the previously selected scan, dial rotation is
not necessary—just push [
During scan, the following can be changed:
• Scan range using [ SCAN], with/without [DIAL].
(BAND)
• Scan direction using [DIAL].
To stop the scan, push [
(VFO)
4
SCAN] for 1 sec.
(BAND)
CLR].
19