3D LabPrint WACO YMF-5 User Manual page 9

Step By Step PDF/VIDEO userguide
1 Choose airplane
.
2. Create account, download
You will receive download link to all the zipped files to your email (please check your spam
3. Gcodes preparing
option A Gcodes:
if your printer is i3 comptatible you can use
SD card and let the 3d printer do it's job. HE temperature is set to 230°C so the layers fuse
together well, you can adjust speed and temperature only through your printer's LCD. If these
Gcodes does not work for you, please proceed to the next options.
... print your plane | www.3DLabPrint.com
at www.3Dlabprint.com, visit our
Basic requirments for WACO YMF-5 are 195/195/195 mm
volume, nozzle 0.4mm recommended (0.35 or 0.5mm
alternativelly). Heated bed recommended. Designed to be
printed with PolyAir 1.0
filament.
Contact: support@3dlabprint.com
folder if not) or you can log in to your account and download
directly from our websites.
prepared gcodes
9
page
Facebook for latest info.
(recommended) or regular PLA
directly. Just save them to the