Other Functions; I Initial Set Mode; I Resettng The Cpu - Icom IC-A4 Instruction Manual

I Initial set mode

Initial set mode is accessed at power ON and allows you to
set seldom-changed settings, in this way you can "customize"
transceiver operations to suit your preferences and operating
style.
D Entering initial set mode
q While pushing [V/M] + [
• The transceiver enters initial set mode and "mn", "bP" or "St" ap-
pears on the display.
w Push[Y] or [Z] one or more times to select the desired
item as described below and at right.
e Push [
] to select the desired condition.
r Push [MW] or [PTT] to exit initial set mode and select the
previous operating mode.
D Memory names
This item allows you to display a
memory name instead of fre-
quency.
• When a memory channel has
not been programmed with a
name, frequency indication ap-
pears instead.
]
], turn power ON.

OTHER FUNCTIONS

D Beep tones ON/OFF
Confirmation beep tones nor-
mally sound when you push a
key. These can be turned ON or
OFF as you prefer.
D Side tones ON/OFF
When using an optional headset
such as those from the David
Clark Co. via the adapter, the
transceiver outputs your trans-
mitted voice to the headset for
monitoring.
Optional
• OPC-752 HEADSET
is required
ADAPTER .
I Resetting the CPU
Reset the CPU before operating the transceiver for the first
time, or when the internal CPU malfunctions.
➥ While pushing [V/M] + [MW] + [SCAN], turn power ON to
reset the transceiver.
• "CLEAR" appears briefly to indicate the CPU has been reset.
6
11