Scan Operation; I Memory (Lockout) Scan; I Vfo (Full) Scan - Icom IC-A4 Instruction Manual

4

SCAN OPERATION

I Memory (lockout) scan

Memory scan repeatedly scans all programmed memory
channels, except those set as lockout channels.
q Push [V/M] to select memory mode, if necessary.
MR
• " " appears.
w Puch [SCAN] to start scan.
- To change the scan direction, push [Y] or [Z].
e Push [SCAN] again to stop the scan.
MEMORY LOCKOUT(SKIP) SCAN
Mch 2 Mch 3
Mch 1
Mch 19 Mch 11
8
SKIP
Mch 4 Mch 5 Mch 6
Mch 7
SKIP
Mch 10 Mch 9 Mch 8

I VFO (Full) scan

VFO scan repeatedly scans between the VFO's lowest
frequency and its highest frequency.
- To change the scan direction, push [Y] or [Z] during
scanning.
D Scan resume condition
When a signal is received during scanning, the scan pauses
on the signal until it disappears, then resumes.
VFO SCAN (Full scan)
lowest
Start
frequency
Scan
Jump
highest
frequency