Installing A Flash Memory Or Firmware Card - IBM InfoPrint 1540 User Manual

Installing a flash memory or firmware card

Note: Flash memory and firmware cards designed for other printers may not work with your printer.
1
Remove the system board access panel. (See Accessing the MFP system board.)
2
Unpack the flash memory or firmware card.
Warning: Flash memory and firmware cards are easily damaged by static electricity. Touch something metal
such as the MFP frame before you touch a card.
3
Holding the flash memory or firmware card by the locking clips, align the plastic pins on the card with the holes on
the system board.
4
Push the flash memory or firmware card firmly into place, and release the locking clips.
The entire length of the connector on the flash memory or firmware card must touch the system board and be
locked into the connector.
Be careful not to damage the connectors.
Installing options
Installing a flash memory or firmware card
93