Hard Disk Wiping - IBM InfoPrint 1540 User Manual

3
Release the buttons when the touch screen blinks and is blank momentarily. Wait.
The Config Menu appears.
4
Touch the down arrow to scroll to Disk Encryption.
5
Touch the right arrow to enter the Disk Encryption menu.
6
Touch the right arrow next to Disable to decrypt the hard disk.
Contents will be lost. Continue? appears.
7
Touch Yes to continue the process.
The Formatting Disk progress screen appears.
Warning: Do not power off the MFP until the process completes.
8
When hard disk decryption is finished, touch Back to return to the Config Menu.
9
Touch Exit Config Menu to exit.

Hard disk wiping

Warning: All resources on the hard disk will be irretrievably deleted. (Resources residing in flash memory or in
RAM remain unaffected.)
Note: This setting is only available on MFP models with an integrated internal hard disk drive.
1
Turn the MFP off. Wait 10 seconds.
2
Press and hold the 2 and 6 buttons on the numeric keypad while turning the MFP on.
3
Release the buttons when the touch screen blinks and is blank momentarily. Wait.
The Config Menu appears.
4
Touch the down arrow to scroll to Wipe Disk.
5
Touch the right arrow to enter the Wipe Disk menu.
6
Touch the right arrow next to Wipe Disk now to wipe the hard disk.
Contents will be lost. Continue? appears.
7
Touch Yes to continue the process.
The Wiping Disk progress screen appears.
Warning: Do not power off the MFP until the process completes.
8
When hard disk wiping is finished, touch Back to return to the Config Menu.
9
Touch Exit Config Menu to exit.
Administrative support
Hard disk wiping
134