IBM InfoPrint 1540 User Manual page 127

7
Open the document cover, and remove any jammed pages.
8
Close the document cover.
9
Touch Continue.
293 Jam
A 293 jam indicates the MFP was sent a scan job, but found no original document in the ADF. To resolve a 293 Jam:
• Touch Continue if no scan job is active when the attendance message appears. This clears the message.
• Touch Cancel Job if a scan job is processing when the attendance message appears. This cancels the job and
clears the message.
• Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the
ADF immediately after the last successfully scanned page.
• Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the flatbed immediately after the
last successfully scanned page.
• Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully
scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or
FTP.
• Touch Restart job if job recovery is active and the job is restartable. The message clears. A new scan job
containing the same parameters as the previous job starts.
Clearing jams
Clearing ADF Jams
125