Changing Exr-2 Sim Cards; Security - ExRobotics ExR-1 Operating Manual

7.9.

Changing ExR-2 SIM cards

ExR-2 SIM cards are located inside the communications module which is inside the hull beside the
mast. To change SIM cards:
▪ Remove the top hull plate.
▪ Remove the front of the communications module's front enclosure.
▪ Change the SIM.
▪ Make sure you do not damage the flameproof joint surfaces around the front enclosure and
back enclosure. Also ensure that the O Ring is correctly seated.
▪ Re-torque the bolts securing the front to the back enclosures to 7 Nm with a calibrated
torque wrench.
ExRobotics will provide remote support the first time a customer performs this task.
7.10.

Security

Robots are fitted with security features:
▪ People cannot connect to the robot unless they have the necessary authentication.
▪ The 4G network provider will be able to locate the robot when it's powered on.
ExRobotics B.V.
Robot System
Operating Guide
This document is considered an uncontrolled copy when printed. Always ensure that you print and use a current version.
Copyright 2021 ExRobotics B.V.
Document No.: Owner:
20190122IP1
Version No.: 12 Ian Peerless
Date:
Page 24 of 30
2021-07-20