Diskette Drive Problems; Display/Monitor Problems - IBM NetVista X40i User Manual

Ibm netvista x40i: user guide
Hide thumbs Also See for NetVista X40i:
Table of Contents

Advertisement

Diskette drive problems

Symptom
Diskette drive in-use light
stays on or the system
bypasses the diskette
drive. or You cannot read
or write to a diskette.

Display/monitor problems

Symptom
General monitor problems 1. Make sure the brightness controls are adjusted correctly.
Blank screen
Unreadable characters
The monitor works when
you turn on the computer,
but goes blank after some
period of computer
inactivity.
58
User Guide
Action
If there is a diskette in the drive, verify that:
1. The diskette drive is enabled. Use the
Configuration/Setup Utility program to check this. For
more information, see "Chapter 4. Using the
Configuration/Setup Utility program" on page 33.
2. The computer is checking for the diskette drive in the
startup sequence. Use the Configuration/Setup Utility
program to verify this.
3. The diskette you are using is good and not damaged.
Try inserting another diskette if you have one.
4. The diskette is inserted correctly, with its label up and
its metal shutter end first in the drive.
5. The diskette contains the necessary files to start the
computer (the diskette must be startable).
6. That there is no problem with your software program
(see "Software problems" on page 69).
If you cannot correct the problem, have the computer
serviced.
Action
2. Some IBM monitors have their own self-tests. If you
suspect a problem with your monitor, see "Running the
IBM Enhanced Diagnostics program" on page 70 and
run diagnostics on the monitor.
If you cannot find the problem, check the other listings on
monitor problems in this table.
Verify that the brightness controls are adjusted correctly.
If you cannot correct the problem, have the computer
serviced.
Have the computer serviced.
The computer is probably set for energy savings, using one
of the power management settings. If the power
management features are enabled, disabling or changing
the settings might solve the problem (see "Other settings in
the Configuration/Setup Utility program" on page 37).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Netvista x4021796643

Table of Contents