IBM NetVista X40i User Manual page 70

If you have just added new software or a new computer option and your
computer is not working, do the following before using the troubleshooting
charts:
1. Remove the software or device you just added.
2. Run the diagnostic programs to determine if your computer is running
properly. (See "Running the IBM Enhanced Diagnostics program" on
page 70 for information about diagnostic programs provided with your
computer.)
3. Reinstall the new software or new device.
Use the following directory to quickly locate problem categories in the
troubleshooting charts.
Problem type
Audio problems
CD-ROM or DVD-ROM
drive
Diskette drive
Display/monitor
DVD disc
General
Intermittent
Rapid Access III keyboard
Rapid Access Wireless
keyboard
ScrollPoint III mouse
ScrollPoint Wireless
mouse
Memory
Modem
Optional device
Software
Universal Serial Bus (USB)
device
54
User Guide
Go to
"Audio problems" on page 55
"CD-ROM, DVD-ROM, or CD-RW drive problems" on
page 56
"Diskette drive problems" on page 58
"Display/monitor problems" on page 58
"DVD disc problems" on page 57
"General problems" on page 59
"Intermittent problems" on page 59
"Rapid Access III Keyboard problems" on page 60
"Rapid Access Wireless Keyboard problems" on page 61
"ScrollPoint III Mouse problems" on page 62
"ScrollPoint Wireless Mouse problems" on page 63
"Memory problems" on page 64
"Modem problems" on page 65
"Optional-device problems" on page 68
"Software problems" on page 69
"Universal Serial Bus (USB) problems" on page 69