Usb Connectors; Audio Connectors - IBM NetVista X40i User Manual

USB connectors

There are five USB connectors on your computer (see Figure 1 on page 10):
three at the rear 2 and two on the right side 3 of the monitor . If you have a
Rapid Access III keyboard, there are also two USB connectors at the rear of the
keyboard.
The two USB connectors on the Rapid Access III keyboard are designed for
low-powered USB devices, such as a mouse or gamepad, only. USB devices
that require more power, such as speakers or an unpowered USB hub, should
be connected to one of the USB connectors on the computer.
If your computer comes with a USB keyboard and mouse, plug them into the
USB ports at the rear of the computer near the power cord connector. These
cables can be relocated to other USB connectors at a later time if desired.
If your computer comes with an IBM Dual Wireless Receiver, plug the receiver
into one of the USB connectors at the rear of the computer. The Rapid Access
Wireless Keyboard and the ScrollPoint Wireless Mouse operate with this
receiver.
Notes:
1. Cable connectors from USB devices are keyed so that they cannot be
connected incorrectly.
2. Do note place the IBM Dual Wireless Receiver on top of the power supply.

Audio connectors

The audio connectors located at the side of the monitor are audio line in 4 ,
audio line out 5 , and microphone 6 .
9
Chapter 2. Setting up your computer