Backing Up Configuration Settings; Available Options; Tools Required - IBM NetVista X40i User Manual

Backing up configuration settings

Important:
Run ConfigSafe (or a similar application) to take a snapshot of your computer
configuration before installing an optional device. Using this snapshot, you can
view and compare the changes in the computer configuration after you install
an option. Also, if you have problems configuring the option after it is
installed, you can use ConfigSafe to restore the configuration to the previous
settings.
When you start your computer for the first time, ConfigSafe takes a snapshot
of the initial configuration of your computer. You might be able to use this
snapshot to restore the configuration to the initial settings.
ConfigSafe is a part of the preinstalled software in your computer. For more
information, use the ConfigSafe help system.

Available options

For the latest information about available options, see the following World
Wide Web pages:
v http://www.ibm.com/pc/us/options/
v http://www.ibm.com/pc/support/
You can also obtain information through the following sources:
v Within the United States, call 1-800-IBM-2YOU (1-800-426-2968), your IBM
reseller, or IBM marketing representative.
v Within Canada, call 1-800-565-3344 or 1-800-465-7999.
v Outside the United States and Canada, contact your IBM reseller or IBM
marketing representative.

Tools required

To install or remove some options in your computer, you will need
Phillips-head and a flat-blade screwdrivers. Additional tools might be needed
for certain options. See the instructions that come with the option.
40
User Guide